1 Effective Paper Width：1800 mm.
2 Max. Machine Speed：200 M/min.
3 Flute Type：
3.1 A Flute：34 ± 2 T/300 mm, Teeth Height：4.5～4.8 mm.
3.2 B Flute：50 ± 2 T/300 mm, Teeth Height：2.6～3.0 mm.
3.3 C Flute：40 ± 2 T/300 mm, Teeth Height：3.5～3.8 mm.
3.4 E Flute：88 ± 5 T/300 mm, Teeth Height：1.1～1.5 mm.
3.5 F Flute：125 ± 5 T/300 mm, Teeth Height：0.75～0.95 mm.
4 Main Motor：Corrugated Roll set - 30HP A.C. Motor with inverter. Pressure Roll – 3HP A.C. Motor with inverter. Glue Roll set – 3HP A.C. Motor with inverter.
5 Heating Way：by steam.
6 With Fingerless design, to produce any size of corrugating board smoothly. It design with Top Vacuum type.
7 Upper and lower corrugating roll diameter is φ320mm, and made by Nickel-Chrome- Molybdenum alloy steel, after heat treatment its hardness is more than SHORE 75, and the surface to be finished by Chrome-plating treatment.
8 Pressure roll diameter is φ340mm, and made by carbon steel. The surface is with grinding then finished by Chrome-plating treatment.
9 Glue roll diameter isφ300mm, and made by steel. The surface is with figure engraving and Chrome-plating treatment.
10 With glue roll auto idle running device, when machine temporary stopped to avoid condensation of glue liquid on surface of glue roll.
11 Doctor glue roll diameter isφ170mm, and made by steel. The surface is with grinding then finished by Chrome-plating treatment.
12 With glue tray design, and make the amount of glue supply enough on glue roll. When speed of machine is changed, the surface of glue roll can keep suitable thickness of glue.
13 With stainless steel glue tray, and equipped with water-cool circling device.
14 Medium-paper preheating roll diameter is φ300mm and made by steel, and synchronize rotate together with corrugating roll.
15 Liner-paper preheating roll diameter is φ300mm and made by steel, and with brake device to control the tension.
16 Upper and lower corrugating rolls, pressure roll are adjusted by hydraulic system control, and glue roll is controlled by pneumatic system.
17 The gaps between of upper corrugating roll and pressure roll, glue roll and doctor glue roll, lower corrugating roll and glue roll are micro-adjustable with digital read-out.
18 The gap adjustment between pressure roll and upper corrugating roll, operation side and drive side are separate adjusted.
19 With motorized glue dams device. (Use AC motor)